Magnum-dynalab MD-108T User Manual

Magnum Dynalab MD 108T ANALOG FM TUNER INSTRUCTION MANUAL

- 10 - IMAGE OF RC2 REMOTE

- 11 - TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, meter lights are not on • Power cord disconnected • Power off at so

- 12 - RECEPTION TECHNIQUES Antenna Cabling: The lead-in cable from the antenna is often the weakest link in the FM system. Some time spent on sel

- 13 - outdoors, but regardless of whether it is installed indoors or outdoors the higher that you can put it the better it will perform. Magnum D

- 14 - PRODUCT SPECIFICATIONS Usable sensitivity- Mono – 0.7 u V 9.0 dBf 50 dB quieting – Mono – 2.0 u V 9.9 dBf 50 dB quieting – Stereo –

- 15 - SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE

- 16 - LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees thi

- 2 - TABLE OF CONTENTS A MESSAGE FROM THE PRESIDENT... 3 UNPACKING YOUR MD 108 T ...

- 3 - A Message From the President Thank you for choosing the Magnum Dynalab “MD 108 T ” Triode FM Tuner, one of our finest FM tuners. Great care h

- 4 - UNPACKING YOUR MD 108 T Carefully inspect all sides of the shipping carton for damage. If there are marks or holes in the carton make note o

- 5 - CONTROL FUNCTIONS The front panel controls consist of the following functions (Each function is clearly displayed on the Front Panel Display

- 6 - minimize the shadow (the light green area). Use the Magic Eye in conjunction with the signal strength meter to achieve the best response. L.

- 7 - INSTALLING THE MD 108 T 1. Position the tuner the shortest distance from your preamplifier. Avoid putting the unit where there are extremes

- 8 - REAR PANEL DISPLAY – INPUTS & OUTPUTS INPUTS (Located at rear of unit): The MD 108 has two antenna inputs, labeled A1 and A2. These are c

- 9 - TUNER REMOTE (OPTIONAL) If your tuner was ordered with the RC2 “PRECISION REMOTE SYSTEM”, please reference the following operating instructio