Magnum-dynalab MD-90T User Manual

Magnum Dynalab MD 90T/90TR ANALOG FM TUNER INSTRUCTION MANUAL

- 10 - IMAGE OF RC1 REMOTE

- 11 - TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound, meter lights are not on • Power cord disconnected • Power off at sour

- 12 - RECEPTION TECHNIQUES Antenna Cabling: The lead-in cable from the antenna is often the weakest link in the system. Some time spent on select

- 13 - Magnum Dynalab offers the MD ST-2, an excellent vertical ½ wave antenna Folded Di-Pole - This is the most common and simplest of all antenna

- 14 - PRODUCT SPECIFICATIONS Usable sensitivity- Mono – 0.7 uV 9.0 dBf 50 dB quieting – Mono – 2.0 uV 9.9 dBf 50 dB quieting – Stereo

- 15 - SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE

- 16 - LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees th

- 2 - TABLE OF CONTENTS A MESSAGE FROM THE PRESIDENT 3 UNPACKING YOUR MD 90T 4 SETTING UP YOUR MD 90T 5 CONTROLS AND FUNCTIONALITY 6 DISPLAYS AND

- 3 - A Message From the President Thank you for choosing the Magnum Dynalab “MD 90T” FM Tuner. Great care has been given in the design, manufactur

- 4 - UNPACKING YOUR MD 90T Carefully inspect all sides of the shipping carton for damage. If there are marks or holes in the carton make note of t

- 5 - SETTING UP YOUR MD 90T 1. Place your tuner the shortest distance possible from your pre-amplifier/ integrated amplifier, being careful to av

- 6 - CONTROLS AND FUNCTIONALITY (Letters correspond with image on the following page) A. POWER – Turns the power (AC) on and off to your tuner,

- 7 - H. SIGNAL STRENGTH METER – The signal strength meter indicates the strength of your incoming FM signal, the higher the better. This meter is c

- 8 - CHECKING OUT YOUR MD 90T 1. Place your power switch to the “ON” position (A on diagram). This should turn on your tuner’s meter lights and f

- 9 - TUNER REMOTE (OPTIONAL) If your tuner was ordered with the RC1 “PRECISION REMOTE SYSTEM”, here are the operating instructions. 1. The power