Magnum-dynalab MD-105 User Manual download pdf (Page 9)

- 9 -

TUNER REMOTE (OPTIONAL)

If your tuner was ordered with the RC4 “PRECISION REMOTE SYSTEM”, here are

the operating instructions.

1. The power switch should be off on the front panel of the tuner

2. Using the remote handheld, push the red “TUNER” button. You will see the

tuner turn on.

3. To tune with the handheld, push and then hold either the “TUNE UP” or

“TUNE DOWN” button until you reach the desired station. The longer you

hold the button the faster the frequency changes. To FINE TUNE hold either

button for a shorter time until your center tune meter is set or your magic

eye tube is closed.

4. Your Precision remote gives you the ability to store and scan up to 20

preset stations. To program a preset station, first tune to the desired

station and then push “STORE”. Then select the preset memory position you

want to store this station in by selecting two digits. For numbers 1-9 you

must select 01-09 and for 10+ directly enter the number. To recall these

presets you must push “P” and then enter the two-digit preset you wish to

recall.

*NOTE-When setting a preset you must enter the numbers quickly.

** Once presets have been entered, briefly turn off the unit with the remote to

save changes

5. To turn your tuner off, push the “TUNER” button until you see the tuner

turn off.

** If you have purchased the optional DAC upgrade to the MD 105, you may

switch between inputs using the left knob or your remote.

Press the “input” button then number: 6 for D1 - RCA

7 for D2 – Optical

8 for USB

9 for Tuner

Your RC4 remote operates with 2 AA batteries, which are included.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Magnum-dynalab MD-105 User Manual Page 9