Magnum-dynalab MD-309 User Manual download pdf (Page 7)

- 7 -

CONNECTING ADDITIONAL SOURCES TO THE MD 309 HYBRID

INTEGRATED AMPLIFIER

CAUTION

As standard practice, you should always turn off the main power to the MD 309

Hybrid Integrated Amplifier (found on the rear panel of the unit) whenever any

source component, interconnect or loudspeaker is being changed in your system.

1. Using your RCA cables, balanced XLR cables, coaxial, or USB, plug the source(s)

into one of the inputs marked in the back of the MD 309.

2. Power up you Hybrid Integrated Amplifier and set the input to match the input on

the rear of the unit that the other source is plugged into.

3. With volume set to zero, power up the source, initialize the playback, and slowly

adjust volume to desired level.

SET UP THE MD 309 HYRBID INTEGRATED AMPLIFIER WITH AN

EXTERNAL HOME THEATER PROCESSOR

The MD 309 Hybrid Integrated Amplifier is equipped with a unity gain input (A3/SSP

Mode Input on the Pre-Amplifier section). This is a switchable input, meaning the

input can be used as a normal pre-amplifier input or in unity gain mode.

To Connect to a Home Theater Processor

1. Turn all the power off to the 309 and unplug the power cord to the MD 309

Hybrid Integrated Amplifier.

2. Connect your theater processor Main Left and Right interconnects into the MD

309 Hybrid Integrated Amplifier through the A3 input.

3. Connect your Main Left and Right speakers to the MD 309 Hybrid Integrated

Amplifier speaker connections.

4. Re-connect the power to the MD 309 Hybrid Integrated Amplifier. Push the

“POWER” button to the “ON” position.

5. Turn the selector knob or use the remote to select input Aux 3.

6. Hit the “set-up” button. On the left middle of the screen you will see Aux 3 lit up.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

No comments

Magnum-dynalab MD-309 User Manual Page 7